Dec 24, 2022  •  For Sale  •  15 Comments

5-Speed Project: 1980 DeLorean DMC-12

Disclosure: This site may receive compensation from some link clicks and purchases.

Restoring a DeLorean has gotten to be less of a tall task thanks to the support of a very devoted aftermarket and enthusiast owners groups. So, taking on a massive project like this 1980 DMC-12 is less of a headache than it might have been at another point in history. This has all the markings of a project that started and then stalled out, with some heavy lifting already done but plenty more to go. The DeLorean is a desirable example as it’s equipped with a manual transmission, so it’s certainly worth the effort to restore. Find it here on eBay where bids have reached $12,500 with no reserve.

The seller is very open about the fact that this DeLorean will require a committed caretaker to bring it all the way back. The body has been separated from the chassis, and in that time, the frame has been scraped of presumably any surface rust and coated with POR-15 followed by a coating of Eastwood internal frame material. The DeLorean’s body remains on a trailer while the frame is separate; obviously, this makes shipping more of a chore, but to the seller’s point, it also makes it easy to view how clean the chassis now is in broad daylight. The seller notes that some of the body panels will require additional work.

The interior paints perhaps a slightly more bleak picture than from the outside, as it’s clear the frame cleaning was only the tip of the iceberg. I suspect like many of us with a great deal of ambition baked into our projects, we can see perfectly how wonderful a vehicle will be when it’s complete; however, it’s far harder to grasp just how long of a road there is between now and then. The interior suggests that this DeLorean was sitting exposed somewhere for years before it was rescued by the current owner, who has obviously focused on the grungy work of preparing a car for a proper restoration but may not want to proceed down the lengthy path he’s currently on.

Here you can see the bare chassis, which does indeed look ready for re-assembly. However, I can also envision a moment where you bolt it back together and say, “Gee, it still doesn’t run, or drive, or do anything other than remain a static figure in my garage that is a huge pain to work around.” I will say, there’s no quicker way for me to want to be rid of a car than when it doesn’t move under its own power and I have zero time to get it to a self-propelled state. The seller indicates in his listing that a ton of spare parts will come with the DeLorean, including a new stainless steel roof box, a new door, new headlights, and more from DMCH. Would you take on a project of this scale?

Comments

  1. gaspumpchas
    Dec 24, 2022 at 2:04pm

    Hang it from the ceiling of your shop and call it a day. No mention of a mill. wouldnt know where to start. Good luck.
    Cheers
    GPC

    Like 3
  2. Troy
    Dec 24, 2022 at 2:25pm

    What a awesome opportunity to take this car and put a Ferrari or Lamborghini engine and transmission in it, upgrade the suspension to something far better than factory, what a fun project

    Like 4
  3. Frank
    Dec 24, 2022 at 3:18pm

    12k for that pile of junk? I wouldn’t give you that for a pristine one. If it wasn’t for Back to the Future these turds would have faded be away already.

    Like 12
  4. TomP
    Dec 24, 2022 at 7:24pm

    This appears to be a case of someone watching too many car restoration tv shows and then thinking he can do the same. Then a few months later when he realizes that he bit off more than he could chew, it’s too late to turn back because the car is a pile of parts. I don’t walk away from projects like this, I run.

    Like 5
  5. Dave, Australia
    Dec 24, 2022 at 8:04pm

    One of these would be outstanding with a 350, 340 or 351 4 barrel. Around 350hp, with a 4 speed.

    Like 5
  6. angliagt angliagtMember
    Dec 24, 2022 at 10:02pm

    “I’m sure all the parts are here to put it back together….somewhere”.

    Like 1
  7. DonC
    Dec 25, 2022 at 9:34am

    The interior scares the bejesus outa me. And I can only imagine the amount of ziplocks full of nuts & bolts in a box somewhere.

    Like 2
  8. scottymac
    Dec 25, 2022 at 10:42am

    Troy: “…upgrade the suspension…? If I’m not mistaken, Lotus developed the suspension on these, could it get any better? Small engine bay might preclude a V-8 – how about the turbo 3.5 from a F-150? Can’t believe haven’t seen more swaps involving those.

    Like 1
  9. Howie
    Dec 25, 2022 at 11:11am

    I wonder if they would be interested in a trade? I have a convertible Chevelle that needs a little work.

    Like 6
    • Dan Ratliff
      Dec 28, 2022 at 6:25pm

      if he isn’t interested in the chevelle, I may be…

      Like 0
  10. SteveRM
    Dec 25, 2022 at 5:17pm

    If you have one of these that has been in a wreck and in need of a new body
    this might be a quick and economical to re-body it.

    Like 0
  11. Howie
    Dec 25, 2022 at 9:23pm

    Sold, $16,110.

    Like 3
    • Big C
      Dec 26, 2022 at 8:36am

      There’s one born every minute.

      Like 4
  12. ThulemanMember
    Dec 26, 2022 at 1:01am

    1980 is it? Production started with the 1981 (I have one) and ended in1983. This some sort of prototype…or typo?

    Like 0
  13. George Birth
    Dec 26, 2022 at 2:35pm

    I agree with Big C. Anyone who takes this one on needs a fully equipped shop and plenty of time to devote to this one. The advice not to walk away from this one run, Yes light the afterburner and drop this one from the rear view mirror ASAP.

    Like 0

Leave A Comment

RULES: No profanity, politics, or personal attacks.

Become a member to add images to your comments.

*

*

Barn Finds