Restored Canadian Ragtop: 1963 Chrysler Windsor
For those not looking to get too greasy but still enjoy a classic ride, this clean green Mopar machine is located in Red Deer, Alberta, Canada (north of Montana) and is listed here on eBay with a current bid of US $1,025 and reserve not met.
It’s been a very long time since Detroit (or Windsor in this case) produced a really big convertible like this one, and for us baby boomers they bring back pleasant memories of long summer cruises with the family and friends. And speaking of Windsor, it’s true that the nameplate was dropped in the USA market after 1961, but these big bruisers continued to be sold under the Windsor name in Canada through 1966 (in the US, this would have been called a Newport). Definitely not a resto project, the seller describes the car as “a father-son cruiser and family treasure for the past 15 years and has been well loved and cared for. Always garage stored and kept shiny [sic] clean, waxed, maintained and always ready for a Sunday drive or car show.”
Canadian Mopars often had notable differences from their American counterparts, but I’ve never seen one where the engine compartment was painted black. The seller states the car was repainted approximately 20 years ago, so it’s likely the firewall and inner fenders acquired their matte black patina at that time. It’s also hard to tell from the supplied photos if the fender tag survived the repaint. And speaking of color, this big block 361 mill would have been turquoise in a US car of this year, but as a Canadian-built car, the engine is red.
The cabin appears similarly in good shape, although the seat covers look slightly ratty. By 1963 the famous Astradome instrument cluster was gone, replaced by a handsome (but more conventional) instrument array in a curved dashboard. The seller reports the radio recently stopped working.
Chrysler unibody cars were a rigid and sturdy design, and the convertibles were less susceptible to twist and flex than other makes. Of course, they were far from immune to rust (and from hotrodders looking for cheap big block donors), therefore relatively few of this generation survive today. The seller provides some numbers from a well-known Canadian Chrysler authority that states only 289 convertibles were built in 1963, and undoubtedly only a fraction of those were sprayed with Canadian-only HH code green paint. Despite the rarity, this big ragtop will likely never approach the values of later Mopar muscle — but that’s also an opportunity for someone looking for a mostly-finished car to start enjoying the car right away. The seller (who appears to be some sort of dealer) indicates they will work with US buyers to get the car across the border. Would you set sail in this ragtop?
Auctions Ending Soon
2002 Subaru Impreza WRXBid Now1 days$333
1975 Chevrolet Corvette ConvertibleBid Now1 days$4,000
1964 Ford F-100 Camper CustomBid Now1 days$2,000
2006 Jeep Wrangler SportBid Now3 days$11,000
1974 Datsun 260ZBid Now5 days$750
Comments
What a cool cruiser. I’m always fascinated by what design engineers were coming up with both interior and exterior during this era. Most notably, the steering wheel in this case. Something slightly sdifferent and unique. The custodians of this particular car, definitely maintained her respectfully.
Beautiful car, only drawback is the square steering wheel. It makes parking and maneuvering with a car this big a bit exciting.
Greetings All,
Not sure n that steering wheel being hard. They had a ridiculous amount of power steering, to the point of it being 1 finger control.
My Father had one of these, along with something called cross ram. It had two carb, with the an aircleaner over each wheel.
Hey ben, good point, that’s where a suicide knob comes in handy😄😎
YEAAAHH!!! Put one knob on all four corners. The weird MoPar steering wheels were an anti-theft device; can’t drive ’em with handcuffs attached.
I wish people wouldnt hang dice from the rear view mirror………..
This just jumps out ay cha😎
Nice, nice, nice. These were much cleaner than the plucked chickens the prior year.
boy, the co had that push button auto for ever, no?
I like the ‘square’ for parkin:
As U look back U know where the wheel is at all times, tires too…
Interesting that Canadian Chrysler Windsors used the “300” crosshair grille vs. standard issue of US variety. Otherwise, not a bad ride. Not my cup of tea, but a MoPar nut wanting something different might like this. After the `61’s, the only full-size Chryslers I cared for were the `65s but hey–that’s just me.
A Canadian built Windsor used a Newport/Windsor style grille, not this 300 piece. This would have been used in Canada on a model called the Saratoga/300. The convertible Saratoga/300 used 300 style exterior trim along with a Windsor style interior. While all of these cars are low volume, a Saratoga/300 convertible is truly RARE.
Nice to see electric windows in a Windsor – not that common.
Didn’t Miss Jane drive one of these on the Beverly Hillbillies?
Canadian fender tags are not like the US variety. On this particular car, the body tag is mounted at the extreme left (driver side) end of the cowl, just below the hood line in the body colour paint. It contains the car’s model code, paint code and trim code. No other information is included. From the look of the interior panels in this car, they have been reskinned in plain vinyl. The original panels had far more detail than these do.
I will take my plucked chicken over this car someone experimented with an unlimited roll of vinyl at the technical college upholstery class.
what a nice car — eh ?
J’ai fait venir cette voiture en France depuis 3 ans et après quelques mois de travail pour la remettre en forme je peux vous dire que c’est une voiture très agréable et qui ne laisse pas indifférent
I had a light yellow one just like this that I sold to a tow truck driver in Calgary AB in1975.It was real solid great driving super comfortable and really fast beauty of a car that I loved and hated to part with but still have all the great memories of my time with that baby. This might even have been the one I owned since it was repainted.
Wonder if the seller ever found a US buyer for the car. Since 2018 when this posting first began, Canada has tightened up on what it will allow an owner to export from Canada. Notice I said the seller. If a US buyer simply takes the car and crosses the border with it the SELLER will be responsible for whatever penalties the Canadian Feds impose. And I can pretty much guarantee that being a Windsor built Windsor, the feds will not issue an export permit for it. Don’t take my word for it – Google exporting a car from Canada and see what the fed’s website tells you.