Prewar Passenger Pigeon: 1934 Hupmobile Aero-Dynamic
From the beginning of automobile production in America to the end of World War II, an amazing number of manufacturers entered and left the market. From simple cycle cars to the many famous luxury vehicle manufacturers, consumers had a dizzying array of choices. Setbacks such as economic downturns, changing tastes, poor management, and the higher costs of limited production thinned most of these smaller manufacturers into extinction. One of the stronger marques was Hupmobile. Always beset by troubles, the company was looking for a miracle when it hired famed designer to pen their new “Aero-Dynamic” sedans in 1934. Currently for sale on craigslist in South Easton, Massachusetts is a fairly straight example of these radically styled Hupmobiles. This interesting sedan, found by reader Peter Rettig, looks like a stalled restoration, and is being offered for just $3,750. Is the low price enough incentive to save a rare survivor from extinction?
Unfortunately for history, most orphan makes produced handfuls of cars compared to the Big Three. From these handfuls, the great majority served as simple transportation to be used up and junked in the end. The few that remained were taken in by caretakers with either an eye for something different or an emotional attachment. With the waning interest of collectors in prewar cars combined with a glaring lack of original or reproduction parts, cars like this one face uncertain futures. Why restore such a car if better and easier to work on examples of other makes are available? Like the passenger pigeon’s plight, once plentiful orphan make cars are fading out of existence. The condition and asking price of this Hupmobile bears witness to this.
Yet, if you look closely at the design of this 421-J model, which was the midrange six cylinder model of the Aero-Dynamic, it is quite stunning. The body resembles what might emerge from the drawing boards at Citroen. Up front, the headlights were almost completely merged with the fenders and hood. Compared to models from Ford and General Motors, this car looks amazingly futuristic. The only American car that had styling as radical was Chrysler’s Airflow. The car’s designer, Raymond Loewy, went on to become famous for penning, among other things, the Pennsylvania Railroad GG-1 electric locomotive, Air Force One’s livery, Studebaker’s 1953 Starliner coupe, and the timeless Avanti.
Yet, there are only a handful of these Hupmobiles left. This rare survivor fortunately appears to be very restorable. A close look at the body reveals only a few spots of minor rust damage. All of the panels are present, but the rear bumper is noticeably absent from the car. Thankfully, a look at period advertising shows that the rear bumper isn’t as radical as the one up front. Finding a bumper that could be adapted to the car might be possible if you took a trip to one of the major antique automobile swap meets such as Pate, Daytona’s Turkey Run, or Hershey. The grill might be a problem. This one is in rough shape at the bottom. The new owner would have to find a good fabricator to restore it to new. Finally, the missing glass is no big deal. All of it is easy to fabricate flat glass.
Inside, the car looks to be disheveled, but complete. What appears to be a radio control dangles from under the dash, as does the ignition switch. The instruments are intact, and they can be rebuilt by a number of specialists across the country. The seller tells us that the seat springs are included with the sale. The only question remaining would be the material and pattern that would be correct for the car. Then again, as long as the finished product looked period correct, how could a judge take off points? What are your chances of finding someone who knew what a 1934 Hupmobile’s interior looked like when it rolled off the assembly line?
Under the hood is an inline six cylinder engine that put out 90 horsepower. The legendary Ford flathead V-8 of 1934 produced 85 horsepower in comparison. The gas tank has been removed from the vehicle, but the seller tells us that the engine will start when gas is poured into the carburetor. Everything except the air cleaner looks to be present, and it was probably removed for the picture.
I hope someone takes this project on. You can’t find a more distinctive vehicle for the price. A concours restoration might be too challenging, but returning this Hupmobile to a presentable and drivable state shouldn’t be too hard. Bringing such a rare car as this one back from the dead is both a labor of love an a service to the automobile community. Cars like this one represent the variety of a bygone era. Saving one of the few survivors of a lost marque before they all go extinct is surely one way to earn your wings in heaven.
Auctions Ending Soon
2006 Ford Mustang Saleen S281 SCBid Now18 hours$15,000
2002 Subaru Impreza WRXBid Now3 days$100
1975 Chevrolet Corvette ConvertibleBid Now3 days$3,000
1964 Ford F-100 Camper CustomBid Now3 days$2,000
2006 Jeep Wrangler SportBid Now5 days$10,500
Comments
A magnificent car ! The engine runs is sweet too!
A bumper and gas tank could be retrofitted to remedy!
Beautiful piece of history!
Hope it find a new owner who is giving it the care it deserves …!
;-)
Beautiful machine. Think how remote the chances were that this car could survive from 1934 all the way to 2018! That’s a small miracle in itself. Wish I had the know-how and $$ to resurrect her…
I like it. Reminds me of the 1930’s vehicles pictured on the Alice Coopers Greatest Hits Album. Rock On!
Reminds me of the 1936 Opel Kadett and Olympia, and there’s one by Nissan as well
Agreed, it really looks futuristic for its time… The ’34 coupe even more, I’d say! This looks like an 1940 Ford, so, at least ~5 years ahead of time in terms of styling!
(Hupmobile coupe pic from this site: https://gaycarboys.com/2012/02/14/rare-1934-hupmobile-for-shannons-melbourne-autumn-auction/ )
For the interior, there are some references over at the H.A.M.B.
I have two of these, both 35’s. The missing parts on this will take years to locate and probably cost as much as the car. The headlight lenses are pretty much unobtanium. Not much easier is the tail lights, and trim between the pieces of the three piece windshield, bumper and on it goes. They are cool but tough to restore, I also hope someone does though. Here is one of mine.
Ed,
Great looking bus. Did you restore it yourself?
My Hupp is pictured above your post .
Ken
Hi Ken,
Thanks for the compliment. Yes I did the trailer, its a Spartan. You are in Australia? Have you started in on your car? I would like to see some progress pics.
Regards, Ed
Hi Ken,
Wow! Nice :) What does it look like nowadays?
Ed yes I am in Australia are you in Edmonton ? And Hup club member ?
Andrew I tried to download photo but would not load.
About half way through Resto .
Gorgeous car! I’m a real sucker for cars with slanting grills from the 30’s
i would like to talk to you as i know whereon is and needs restoration, I would love to see more pictures of both of yours, such a wild looking car
In a case like this car you need to be one of those guy with multiple skills that can be brought to the table. If you can fabricated and do body work your ahead of the game but if your a machinist with good mechanical skills as well then this car is for you.I’m a mechanic and a welder fabricator. With some basic get by machining skills and some basic body skills. But I don’t have the funds or the room for a second project. Like the town and country from yesterday I think this would be a great project for someone looking for a challenge. The other option is to trans plant more common brand period correct parts / systems into this car to move the project forward while you spend the rest of your life tring to find correct parts. It could be restored this way and if done well it would take someone really knowledgeable on hubmobiles to see the differance. My guess is those guys are is scarce as the cars and getting scarcer.
I know it’s heresy, but I’d restomod the heck out of this bad boy – but try to keep it true to the spirit of the car’s design. This is a really cool find, but as others have pointed out, pretty much a black hole when it comes to restoration cash. Hope it finds a great home.
Hi there,
Its today possible to restore anything!
Missing parts can be produced, easier than any time before.
3d print, 3d milling, CAD, makes modelmaking easier than ever.
As far as getting your wings to heaven restoring it, I think St. Peter likes hot rods.