Barn Find: 1949 Chevrolet Panel Truck
If there were ever a barn find vehicle, this would be it. Tucked away for 20 years, the seller does not know the specific year, but they believe it to be a 1949 Chevrolet panel truck. No VIN is listed, no miles, and the title is missing, so things will have to go the bill of sale route. The asking price is $7,000 and it is located in Sunland, California. Thank you, Ikey H., for the tip. You can view more on Craigslist.
The listing describes that they do not believe there is an engine or transmission in the truck. However, they do note that there are lots of parts crammed in the back, which is evident in the photos. It doesn’t look like there is anything that would aid in getting the truck moving though. The seller has taken the fenders off to show there is no engine or drive train. While there is so rust, it does not look detrimental.
The interior is not that bad. It is dirty and missing many things, but structurally and visually, it is sound. With all the parts stored in the cargo area, the seller suggests one could part it out at a swap meet. That might not be a bad idea if you take inventory of all that is in there and it does amount to something valuable. It is hard to determine if the asking price for the vehicle itself will be worthwhile, depending on your goals.
One idea that came to mind was buying it for advertising. It would be a great roadside sign for some sort of rural business. Although, it seems kind of expensive for something of that use. The body does seem to be in good shape, along with the interior so it certainly can be restored. Or, at least it could be used for creating some sort of functioning vehicle. It really is quite a blank canvas that you could make anything out of.
Auctions Ending Soon
2006 Ford Mustang Saleen S281 SCBid Now2 hours$17,500
2002 Subaru Impreza WRXBid Now3 days$333
1975 Chevrolet Corvette ConvertibleBid Now3 days$3,000
1964 Ford F-100 Camper CustomBid Now3 days$2,000
2006 Jeep Wrangler SportBid Now5 days$10,500
Comments
put in a chevy v8, and make a nice Workshop truck. that Thing full of all the Tools needed for a roadside repair, and classic Workshop Name on it,,
Asking price a bit high but that looks like a solid foundation to do something with.
Wait. The seller has taken the fenders off to show there is no engine or drive train. Not how I would have checked, but it helps with the resto. I agree with bobhess comments. Cool rig for sure, never noticed the trim on the rear fenders, adds some flair, I like it.
Everything’s expensive in California.
If I bought this, I would drive out into the middle of nowhere to clean it out. I don’t want all the vermin racing out of it making a beeline to the house.
The guy seems straightforward and cleaned it out. Look it over good. I like JBP’s idea- slide a 283 with a 4 speed in it , and use it! Work truck and advertising. Good luck for the new owner. Interesting that Chevy went to the car platform for the sedan delivery shortly after this.
Cheers
GPC
Sorry guys, this one’s a ’48. You couldn’t
get the ribbed fender trim in ’49. Last one I saw was parked at an auto body shop nearly 50 years ago. The one I saw
had 4 chrome strips on each fender. The
trim looks very much like what you’d see
on a high end Fleetline model for ’48. Think I’d go with a 250 or 292 straight 6
instead of a small block V-8. Anyone can
can build it that way but it takes someone thinking outside the box to do
it. Those big sixes will slide right in and
most everything bolts right up and it’s
very straight forward. I’d also add a beefed up auto tranny and some electric
power steering so that my girls could drive it with ease. Drop the front axle
and add disc brakes up for more stopping
power too. There’s nothing like an old
school build on a budget!
I totally agree with the inline 6 cylinder…..that’s what I would put in it!
Looks like good bones for a project, power and finished look totally at the new owner’s discretion.
The Woodward Avenue Dream Cruise was yesterday, cool cars and other rides where everywhere! No matter how this one would wind up, it’d fit right in.
Barn??
That’s no barn – a hut at most.
Looks more like a lean-to.
That shack doesn’t even look as good as the ones we youngsters would build from materials “requisitioned” from nearby construction sites.
Have to agree in that I built a log cabin with a friend when I was about nine years old. Found a real hippie sleeping in it in 1969 in Toronto North York Don Valley River. We borrowed a large garage door from a local mansion that was being demolished to make way for a new hospital.
When the land was purchased for the new hospital the construction company hired to clear the land used a bulldozer to remove my log cabin with the super strong wooden garage door roof.
Back in those days we built stuff to last decades even as kids!
Bob
The fake hippies were a real problem. The real hippie was probably getting ready for Woodstock. Damn hippies.
Now to the panel truck, really? Does the owner have a spinning wheel with random sale price numbers on it ? Oh well landed on 7K, 7K it is.
ATTENTION EASILY FOOLED PEOPLE! HAVE YOU LOST YOUR MIND?
Back in realityville, this poor hulk, ie collections of parts, won’t be leaving anytime soon unless the seller pays someone to take it.
I have a friend driving a ’49 around who would think you were crazy if you offered her 7K for her truck;and she’d take your money before you came to your senses.
Geez the ask isn’t a bit high, it’s cRaZy!
Bought and sold several of these over the years, I’d put this at no more that 2500.
The insanity…
I hate dealing with basket cases you have to figure out where things go, what’s missing and where your going to find the missing parts. I’d pay more for a complete and assembled one before buying this. If it were still together I’d say $2500.00 basket case missing parts $800.00 I guess the owner is going to have to find another barn to put it in until he comes to understand that his price is high. I guess it will be how bad he wants it gone.
No, it’s just to much money for what you get.
God bless America
She’s going to need new tires for SURE!
I’ve just started on a ‘53 1 ton panel, installed a 292 with a 700r4. Looking for an appropriate differential that doesn’t have 5 series gears. My mind says this will be a great truck. The featured truck is $4500 more that I have in mine so far but no rust
$7K!!! Please, GMAB! $300 big money for this BF!
I’ve got to jump in this fun!!! WOO HOO
I sold one like this except had a Lingenfelter engine making 850hp and a 25K frame off paint job for 250.00, last week. lol Don’t hate me, I couldn’t resist the fun… lol
Jimmy, this Barn Finds; home of fans of low, or no power!😎
Thanks.
Really cool truck!! The painter got slightly carried away with painting the windows bumper and the rubber around the windows as well!! Solid looking truck!! I like it!!